Products
COBRA-18L DB25 to (x3) RJ45 Adapter
$24.99
Make your module more versatile by splitting your DB25 cable to 3 RJ45 6 cue outputs.
CP-1 Custom Prototype
$25.00
CP-25 Custom Prototype
$25.00
CP-80 Custom Prototype
$80.00
IGNITE i18 Firing Module
$219.99
This is the flagship module from IGNITE. The i18 module is a compact, 18-cue firing module supporting both free-shoot manual and fully automated shows. No controller needed, just use your Bluetooth...
IGNITE i18 Plus Bundle
$318.95
Get started with the IGNITE i18 firing system at full speed! This "Plus" bundle include an RJ2-18i slat adapter and three 6-cue slats!
With three slats your display fire across a wider display si...
IGNITE i36 Firing Module
$359.99
This is the flagship module from IGNITE. The i36 module is a compact, 36-cue firing module supporting both free-shoot manual and fully automated shows. No controller needed, just use your Bluetooth...
IGNITE RJ-36i Slat Adapter Plate (6-port)
$79.99
Expand the functionality of the i36 by adding slat connections! This breakout provides connections for six 6-cue slats. (Not for use w/Clip-On igniters)
IGNITE RJ-36i Slat Adapter Plate (6-port) + Slats (x6) Bundle
$149.99
Bundle the RJ-36i with a your new i36 and six 6-cue slats to save. With six slats your display will fire more matches across a wider display site. (Not for use w/Clip-On igniters)
IGNITE RJ-3P Adapter Plate (6-port) + Slats (x6) Bundle
$129.99
Bundle the RJ-3P with a your new i18 and six 6-cue slats to save. With six slats your display will fire more matches across a wider display site. (Not for use w/Clip-On ignitors)
IGNITE RJ-3P Slat Adapter Plate (6-port)
$59.99
Expand the functionality of the i18 by adding slat connections! This breakout provides connections for three 6-cue slats, or six 6-cue slats in parallel. (Not for use w/Clip-On igniters)
IGNITE RJ2-18i Adapter Plate (6-port)
$59.99
Expand the functionality of the i18 by adding slat connections! This breakout provides connections for three 6-cue slats, or six 6-cue slats in parallel. (Not for use w/Clip-On igniters)
IGNITE RJ2-18i Slat Adapter Plate + Slats (x3) Bundle
$89.99
Expand the functionality of the i18 by adding slat connections! Convert your onboard QuickPlugs to 6-Cue Slats to make setup faster and easier! (Not for use w/Clip-On igniters)
*IGNITE i18 not inc...
IGNITE RJ2-18i Slat Adapter Plate + Slats (x6) Bundle
$129.99
Expand the functionality of the i18 by adding slat connections! Convert your onboard QuickPlugs to 6-Cue Slats to make setup faster and easier!
With two outputs for each cue you will be able to fir...
IGNITE RJ3-36i Slat Adapter Plate (18-port)
$129.99
Expand the functionality of the i36 by adding slat connections! This breakout provides connections for eighteen 6-cue slats. (IGNITE i36 NOT included)
IGNITE RJ3-36i Slat Adapter Plate (18-port) + Slats (x18) Bundle
$349.99
Bundle the RJ-36i with a your new i36 and eighteen 6-cue slats to save. With 18 slats your display will fire more matches across a wider display site. (Not for use w/Clip-On igniters)
IGNITE RJ3-36i Slat Adapter Plate (18-port) + Slats (x6) Bundle
$199.99
Bundle the RJ-36i with a your new i36 and six 6-cue slats to save. With six slats your display will fire more matches across a wider display site.
IGNITE RJ45 Pass-Thru Kit
$22.99
Relocate three RJ45 ports to the outside of your enclosure build. Individual RJ45 ports gives you flexibility in layout, and rugged, water resistant build. Included is a drill template to help yo...
IGNITE RJ45 Pass-Thru w/Pigtails Kit
$29.99
Relocate three RJ45 ports to the outside of your enclosure build. Individual RJ45 ports gives you flexibility in layout, and rugged, water resistant build. Included is a drill template to help yo...
IGNITE-1C External Charge Port
$12.99
Relocate the charge port of your IGNITE i18 or IGNITE i36 module to the exterior of your DIY enclosure build. Comes with mounting screws and a template to help you drill and cut your enclosure to fit.
IGNITE-1CA External Charge Port w/ Antenna Extension
$18.99
Relocate the charge port and antenna of your IGNITE i18 or IGNITE i36 module to the exterior of your DIY enclosure build. Comes with mounting screws, SMA antenna extension and a template to help yo...
Knurled Thumbscrews
$8.99
10-packAdd or replace thumbscrews in your direct attach slats. Black thermoplastic head and stainless steel screw packed 10/bag.
muuxBRD Bottle Opener
$4.99
Open your next beer with your muuxBRD bottle opener. Made from the same circuit board material as your slats. This fiberglass laminate will open your bottle and make your fellow pyros jealous. And ...
muuxBRD Heather Gray Snapback
$29.99
I’m picky about my hats, and for me the best balance in comfort, adjustability and cost is the Yupoong 6606 trucker snapback. A six panel cap, with mesh back and quilted sweatband.
The muuxBRD logo...
muuxBRD Key Tag
$4.99
Give yours keys a little flair like your TGIF waitress back in the 90s. Show your love for muuxBRD and make your keys stand out!
Maybe your remote key or trailer keys need to stand out. Get your...
muuxBRD Pyro Poke
$19.99
Pyro pokes are a dime a dozen these days. Sometimes it's the small details that make a difference. Has your poke ever rolled away from you? The muuxBRD poke's flat sides keep it from getting awa...
muuxBRD QuickSplit T-shirt
$19.99
Short sleeved, soft and light t-shirt in a heather royal blue with a white silk screened graphics.
Front has the “muuxBRD” logo across the chest. The back has the “More Ematches Less Time” graphic ...
MX-1F Fuse Cutter
$5.99
Find your self cutting and trimming visco fuse, you need a muuxBRD fuse cutter. Keep yourself safe by not using scissors, cut your fuse without any metal to metal contact.
MX-24A 2.4GHz Directional Antenna
$12.99
Need some extra range from your 2.4GHz firing system? Use a directional antenna to focus the radio frequency energy in the direction you need it. This directional antenna connects to standard SMA ...
QS-12M Breakout Board Mounting Base
$2.99
Add rigidity, back side protection, and isolate electrical connections.
QuickCombo-18 Cobra Standard Slat
$59.99
Indecisive? QuickPlugs or Traditional ematches? Choose both with muuxBRD QuickCombo slats. This 18-cue slat combines QuickPlug and QuickLeverPRO connections into one slat. Solve your work flow ...
QuickCombo-6 Standard Slat
$33.99
Indecisive? QuickPlugs or Traditional ematches? Choose both with muuxBRD QuickCombo slats. This 6-cue slat combines QuickPlug and QuickLeverPRO connections into one slat. Solve your work flow i...
QuickConnect-12P fireTEK 12-Cue Parallel Slat
$33.99
Save time, and labor using quick connect (aka QuickPlug) ematches with your fireTEK system. Replace your standard 12 cue rails, with quick connect slats, and use the familiar RJ45 (Cat 5) interface...
QuickConnect-18 Cobra Standard Slat
$26.99
Take your Cobra firing system to the next level with quick connect ematch technology. Wire more product in less time for a minimal investment. Connects to DB25 cables you already use with Cobra.
QuickConnect-18 COBRA Standard Slat (Legacy)
$26.99
NOTE: This slat is for a legacy design. If you wish to order this design expect MOQ and extended lead times.
Cobra compatible 18 cue Quick Connect (aka QuickPlug) ematches. Use standard Cobra cabl...
QuickConnect-18E COBRA 18 Standard Slat Enclosure (Legacy)
$14.99
NOTE: This enclosure is for a legacy slat design. Confirm this is the mating part for your slat.
Give your slats added rigidity, full protection, and isolate electrical connections. Sold individua...
QuickConnect-18E Slat Enclosure
$15.99
Give your slats added rigidity, better protection, and isolate electrical connections. Fits both standard and series slat models. Fits QC-18 revB and QC-18 revA 18-cue Cobra slats, ensure these are...
QuickConnect-18M COBRA 18-Cue Standard Mounting Base (Legacy)
$5.99
NOTE: This mounting base is for a legacy slat design. Confirm this is the mating part for your slat.
Give your slats added rigidity, back side protection, and isolate electrical connections. Sold ...
QuickConnect-18S Cobra Series Slat
$29.99
Want to fire more ematches with fewer cues? The QuickConnect-18S is a series slat to allow multiple slats to be connected to a single DB25 output of your field unit.
QuickConnect-18S COBRA Series Slat (Legacy)
$29.99
NOTE: This slat is for a legacy design. If you wish to order this design expect MOQ and extended lead times.
These Cobra compatible slats give you flexibility in how you connect your QuickPlug or ...
QuickConnect-18SE COBRA 18 Series Slat Enclosure (Legacy)
$15.99
NOTE: This enclosure is for a legacy slat design. Confirm this is the mating part for your slat.
Give your series slats added rigidity, full protection, and isolate electrical connections. Sold in...
QuickConnect-18SM COBRA 18-Cue Series Mounting Base (Legacy)
$6.49
NOTE: This mounting base is for a legacy slat design. Confirm this is the mating part for your slat.
Give your series slats added rigidity, back side protection, and isolate electrical connections...
QuickConnect-1F FireFly Clips
$3.99
Replace your FireFly Titan Clips with these QC-1F slats for use with QuickPlug ematches. QuickPlug or QuickConnect ematches will save you time during setup, and make it a simple switch using the s...
QuickConnect-24 Mongoose 24-Cue Standard Slat
$32.99
Take your Mongoose firing system to the next level with quick connect ematch technology. Wire more product in less time for a minimal investment. Connects to DB25 cables you already use with Mongoose.
QuickConnect-24E Slat Enclosure
$16.99
Give your slats added rigidity, better protection, and isolate electrical connections. Fits both standard and series slat models. Fits QC-24 Mongoose slats, ensure these are compatible with your gear.
QuickConnect-24S Mongoose 24-Cue Series Slat
$37.99
Want to fire more ematches with fewer cues? The QuickConnect-24S is a series slat to allow multiple slats to be connected to a single DB25 output of your field unit.